Useful tips on shisha charcoal briquette machines

Hydraulic shisha charcoal briquette making machine is one of the important equipment for making shisha charcoal briquettes. It is a specially designed forming machine that can compress powdery charcoal into charcoal briquettes. The raw materials of making shisha charcoal briquettes include all kinds of fruit woods and coconut shells. Generally, coconut shells are regarded to be the best material for makig hookah. The raw material needs to be carbonized and crushed. Then it is necessary to add some adhesive into the charcoal powder. After mixing them, the shisha charcoal briquettes will come into use.

E.P hydraulic shisha briquette machine is high-quality charcoal equipment. Under normal circumstances, as long as you do a good job on maintaining the charcoal briquette making equipment at a regular period, the machine will run smoothly. However, we have to admit that some unforeseen circumstances are inevitable. This requires the operators for charcoal briquette machines to seriously understand the causes of the problems so that to solve problems timely. E.P will introduce you two possible emergencies and corresponding solutions as follows.

First one, the feeding port of the shisha charcoal briquette machine is jammed by the charcoal powder. To solve this problem, you should shut down the machine immediately. After that, you need to clean the material in the feeding port. Then you allowed to start the machine again.

The second one, the motor triangle belts of the shisha charcoal equipment are too loose, causing belts slip. For solving this problem, it is very easy: to tighten or replace the triangle belts.

E.P Machinery has been manufacturing and exporting for over ten years. In other words, we have a lot of experience in shisha charcoal briquette industry. Any interest, please contact.