Multipurpose iron powder roller press

2019-12-26 10:16:00
E.P
Original
1520
Summary :Multipurpose iron powder roller press machines can be used to make briquettes from pulverized coal, iron powder, coking coal, aluminum powder, iron dust,oxide-scale, coal powder and so on.

Multipurpose iron powder roller press machines can be used to make briquettes from pulverized coal, iron powder, coking coal, aluminum powder, iron dust,oxide-scale, coal powder,mineral waste residues, gypsum powder, tailings, sludge, kaolin and other kinds of powdery waste and residues. The iron powder roller press machines are widely used infireproofing material factory, power plants, metallurgical industry, chemical industry, energy industry, transportation, heating and other industries. After being pressed by a roller press machine, thepowdery material will become high-densitybriquettes, which makes it easy to be transported. Multipurpose iron powder briquette machines are often used to recycle industrial wastes and residues. Therefore, roller press machines have good economic and social benefits.

briquettes

Major components of the roller press machine:

Feeding system: This system canensurethat the process offeeding powder material goes steadily;

Driving system: The driving parts of iron powder roller pressinclude the motor,atriangle belt,thereduction gear,the exposed gear and rollers.

Hydraulic protection device: E.P iron powderroller press machines have hydraulic protection devices. When theroller press is working, the hydraulic pump will drive the high pressure oil into the hydraulic cylinder to make the piston produce axial displacement.Then the hydraulic device will generate pressure to meet the need of production. 

roller press machine

Notices:

1. The size ofthepowdery material should be among 90to 260 mesh.

2.It is not allowed that there are some high-hardness impurities in the iron powdery material, otherwise the surface of the roller will be damaged.

3. The operators should make sure that feeding material goes evenly, so it is suitable to use a screw-type feeding machine for feeding the powder material;

4.The operators should often observe thecondition of the feeding port and adjust feeding timely according to the actual situation.

Write a Comment
Comment will be posted once reviewed.
Article Category

Phone

+86-13673361755

Whatsapp

+86-13673361755

Telephone

+86-371-8611808

Email

sale@ep-machine.com

Address

Shenglongjinzhonghuan Building, Zhongyuan District Zhengzhou City, Henan Province, China.